The CDE-A series is a new generation of conventional lathe with a popular right-angle flat shape and wide front and rear legs. The bed has been subjected to surface induction hardening and grinding, and the quenching hardness is G50. The head box gear has been subjected to high-frequency quenching and precision grinding of the teeth, and the gear precision can reach 7 levels....
The CDE-A series is a new generation of conventional lathe with a popular right-angle flat shape and wide front and rear legs. The bed has been subjected to surface induction hardening and grinding, and the quenching hardness is G50. The head box gear has been subjected to high-frequency quenching and precision grinding of the teeth, and the gear precision can reach 7 levels.
They are characteristics of power, high spindle speed, highly rigidity. The various ferrous and non-ferrous metals parts may be turned through the heavy cutting by carbon alloy tools.
Max. Swing over bed
Max. Swing over carriage
Max.swing over gap
Max. Workpiece length
Width of guide way
Diameter of spindle bore
Taper of center sleeve
Travel of top slide
Max.travel of cross slide
Pitch of longitudinal leadscrew
Travel of tailstock center sleeve
Diameter of tailstock center sleeve
Taper of tailstock center sleeve
Main motor power
High rigidity structural design
The bed is integrally cast, the bed rails are arranged in a mountain shape and a flat guide rail, and have a large load-bearing cross section. Therefore, the bed has good rigidity and shock absorption, and high-precision cutting processing can be ensured.
High rigidity spindle
The front of the spindle adopts NN3020K series double row cylindrical roller bearing, the rear end adopts 7214AC angular contact ball bearing and 51215 series axial thrust ball bearing and applies appropriate preload force, together with the best span support and box headstock, so that The spindle has high rigidity.
High reliability tool holder
Highly rigid mechanical tool holder for high reliability and high repeatability.
Fast vertical and horizontal drive
The machine's slide box is equipped with a fast-moving device that can be moved to the desired position in the vertical and horizontal directions. The interlock protection function of the light bar and the screw ensures the normal and trouble-free operation of the feed system.
Chip cooling system
In order to ensure the cleanliness of the site, there is a chip on the lower part of the bed to ensure that the chips are away from the processing area. The separate cooling system is equipped with a high-flow cooling pump to provide forced cooling for turning.
3 - Jaw Chuck
Fixed Centre (spindle)
Dead Center 2 No.
Full Length splash guard
Coolant system & Tank
Point Nose oil gun
Tool kit with spanner & Allen key
4 jaw Chuck
Quick change Tool Post
Taper Turning Attachment
Anti vibration pads
Thread chasing dial
Packing & Shipping